Table of Contents

ata_tf_to_fis — Convert ATA taskfile to SATA FIS structure

ata_tf_from_fis — Convert SATA FIS to ATA taskfile

ata_dev_classify — determine device type based on ATA-spec signature

ata_id_string — Convert IDENTIFY DEVICE page into string

ata_id_c_string — Convert IDENTIFY DEVICE page into C string

ata_noop_dev_select — Select device 0/1 on ATA bus

ata_std_dev_select — Select device 0/1 on ATA bus

ata_port_queue_task — Queue port_task

ata_pio_need_iordy — check if iordy needed

ata_port_probe — Mark port as enabled

__sata_phy_reset — Wake/reset a low-level SATA PHY

sata_phy_reset — Reset SATA bus.

ata_dev_pair — return other device on cable

ata_port_disable — Disable port.

ata_busy_sleep — sleep until BSY clears, or timeout

ata_bus_reset — reset host port and associated ATA channel

ata_std_probeinit — initialize probing

ata_std_softreset — reset host port via ATA SRST

sata_std_hardreset — reset host port via SATA phy reset

ata_std_postreset — standard postreset callback

ata_std_probe_reset — standard probe reset method

ata_drive_probe_reset — Perform probe reset with given methods

ata_dev_revalidate — Revalidate ATA device

ata_qc_prep — Prepare taskfile for submission

ata_sg_init_one — Associate command with memory buffer

ata_sg_init — Associate command with scatter-gather table.

ata_eng_timeout — Handle timeout of queued command

ata_qc_issue_prot — issue taskfile to device in proto-dependent manner

ata_host_intr — Handle host interrupt for given (port, task)

ata_interrupt — Default ATA host interrupt handler

ata_device_resume — wakeup a previously suspended devices

ata_device_suspend — prepare a device for suspend

ata_port_start — Set port up for dma.

ata_port_stop — Undo ata_port_start

ata_device_add — Register hardware device with ATA and SCSI layers

ata_host_set_remove — PCI layer callback for device removal

ata_scsi_release — SCSI layer callback hook for host unload

ata_std_ports — initialize ioaddr with standard port offsets.

ata_pci_remove_one — PCI layer callback for device removal